HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Citation Map Services Email this article to a friend Similar articles in this journal Similar articles in PubMed Alert me to new issues of the journal Add to Personal Folders Download to citation manager Author home page(s): Chun Xu Arminder S. Jassar Robert C. Gorman Joseph H. Gorman, III Permission Requests Citing Articles Citing Articles via Google Scholar Google Scholar Articles by Xu, C. Articles by Jackson, B. M. Search for Related Content PubMed PubMed Citation Articles by Xu, C. Articles by Jackson, B. M. Related Collections Valve disease

---

Original Articles: Adult Cardiac

Augmented Mitral Valve Leaflet Area Decreases Leaflet Stress: A Finite Element Simulation

^a Gorman Cardiovascular Research Group, University of Pennsylvania, Glenolden, Pennsylvania
^b Department of Surgery, University of Pennsylvania, Philadelphia, Pennsylvania

Accepted for publication January 20, 2012.

^_* Address correspondence to Dr Jackson, Division of Vascular Surgery, 4 Silverstein Pavilion, Hospital of the University of Pennsylvania, 3400 Spruce St, Philadelphia PA 19104 (Email: benjamin.jackson{at}uphs.upenn.edu).

Background: Using human mitral valve (MV) models derived from three-dimensional echocardiography, finite element analysis was used to predict mechanical leaflet and chordal stress. Subsequently, valve geometries were altered to examine the effects on stresses of the following: (1) varying coaptation area; (2) varying noncoapted leaflet tissue area; and (3) varying interleaflet coefficient of friction (μ).

Methods: Three human MV models were loaded with a transvalvular pressure of 80 mm Hg using finite element analysis. Initially leaflet coaptation was set to 10%, 50%, or 100% of actual coaptation length to test the influence of coaptation length on stress distribution. Next, leaflet surface areas were augmented by 1% overall and by 2% in the noncoapted "belly" region to test the influence of increased leaflet billowing without changing the gross geometry of the MV. Finally, the coefficient of friction between the coapted leaflets was set to μ = 0, 0.05, or 0.3, to assess the influence of friction on MV function.

Results: Leaflet coaptation length did not affect stress distribution in either the coapted or noncoapted leaflet regions; peak leaflet stress was 0.36 ± 0.17 MPa at 100%, 0.35 ± 0.14 MPa at 50%, and 0.35 ± 0.15 MPa at 10% coaptation lengths (p = 0.85). Similarly, coaptation length did not affect peak chordal tension (p = 0.74). Increasing the noncoapted leaflet area decreased the peak valvular stresses by 5 ± 2% (p = 0.02). Varying the coefficient of friction between leaflets did not alter leaflet or chordal stress distribution (p = 0.18).

Conclusions: Redundant MV leaflet tissue reduces mechanical stress on the noncoapted leaflets; the extent of coaptation or frictional interleaflet interaction does not independently influence leaflet stresses. Repair techniques that increase or preserve noncoapted leaflet area may decrease mechanical stresses and thereby enhance repair durability.