|
|
||||||||
Ann Thorac Surg 2003;76:S2216-S2219
© 2003 The Society of Thoracic Surgeons
a Cachet Medical Limited, Columbia Heights, Minnesota, USA
* Address reprint requests to Dr Haworth, 4022 7th St NE, Columbia Heights, MN 55421, USA.
e-mail: billhaworth{at}aol.com
Presented at the symposium, "Gibbon & His Heart-Lung Machine: 50 Years & Beyond," Philadelphia, PA, May 2, 2003.
Abstract
From 1953 when Gibbon first successfully supported a patient with extracorporeal circulation to about 1980 many different types of oxygenators were developed. Since their introduction in the early 1980s, microporous hollow fiber oxygenators with blood flow outside the fiber have become the dominant type of oxygenator in use. Their success has been due to both the ability to specify the required properties for a good oxygenator and the application of modern design tools, especially computational fluid dynamics, to the design process. The result has been the availability of many oxygenators from different manufacturers that differ to some extent in their performance but all of which provide adequate performance for successful and safe clinical use.
This article has been cited by other articles:
![]() |
D. M. Hoganson, J. L. Anderson, E. F. Weinberg, E. J. Swart, B. K. Orrick, J. T. Borenstein, and J. P. Vacanti Branched vascular network architecture: A new approach to lung assist device technology J. Thorac. Cardiovasc. Surg., November 1, 2010; 140(5): 990 - 995. [Abstract] [Full Text] [PDF] |
||||
![]() |
G. S. Murphy, E. A. Hessel II, and R. C. Groom Optimal Perfusion During Cardiopulmonary Bypass: An Evidence-Based Approach Anesth. Analg., May 1, 2009; 108(5): 1394 - 1417. [Abstract] [Full Text] [PDF] |
||||
| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |
| ANN THORAC SURG | ASIAN CARDIOVASC THORAC ANN | EUR J CARDIOTHORAC SURG |
| J THORAC CARDIOVASC SURG | ICVTS | ALL CTSNet JOURNALS |